Lock Off-Road Combat Wheels On My 2024

4thgen.taco · 2026-03-13T14:08:04+00:00

Alright so I made the move to 37s! Finally has been done. I had been looking to do this for awhile now but had to figure out just how I wanted to do it without portals and with a 2.5 inch coil over lift. After watching some videos I knew it was going to require cutting plastic…. And the body. I have more pictures coming soon but here is a sneak peak of the rear so far and I’ll explain what I did. In the first pic you can see what it used to look like and see where I ultimately chose to cut. This cut was with the natural body line and fender flare. Once I cut that line I used the cut line to cut the body. This was the hard part. To make it easier I could’ve taken a marker and traced the line and then taken off the fender flare but I wanted a percise cut. After this was done it was all about taking the burrs out and cleaning it up. Take your time when you do this. I still need to do the front but I am waiting for wider fender flares from another company so I will have to redo the rear and will make another post! Thanks for reading. Good luck cutting!

rustytaco

Administrator

Staff member

Feb 15, 2025

Decided that machined wheels were going to be the move... Added these Lock Off-Road Combat wheels in a +1. There's a good amount of poke, but I like it! The first photo below shows how much they stick out. Second one does a bit as well. I'll get more photos later. The finish pops nicely against the Bronze Oxide and the gold bolts help to tie it all together. These are technically for the old hub diameter, so we had to add some hub centric adapters from Gorilla.

Find them online here.