My 4th Gen Was In A Booth At Expo West!!!

Dyno-Proven Gains from Our SXTH Intercooler

SXTHElement · 2025-08-01T14:04:26+00:00

Hey everyone, We just finished dyno testing our new front mount intercooler for the 2024+ Tacoma, and wanted to share some real numbers and context with you all. This test was done on a stock truck with only our intercooler installed — no intake, no tune. The goal was to isolate what the intercooler alone can do. We used 4th gear on the 10-speed auto, which meant we had to feather the throttle below 4K RPM to avoid kickdown, so the low-end numbers are a bit skewed. But above 4K, the results were extremely consistent and repeatable. Here’s what we saw comparing OE vs SXTH intercooler: Peak power jumped from 248.6 hp to 264.1 hp (+15.5 hp) Peak torque increased from 288.6 lb-ft to 303 lb-ft (+14.4 lb-ft) Midrange output was noticeably stronger across every run Even in worst-case comparisons, our core outperformed factory We’re seeing lower intake temps across the board thanks to: A bar and plate core with 45% more volume Lower pressure drop (1.5 psi vs 2.4 psi stock) Up to 50°F lower temps at the turbo outlet and 12°F lower post-intercooler It’s a direct bolt-on, retains all OEM sensors and components (including grille shutters), and doesn’t require a tune. It’s also compatible with the 2025+ 4Runner and 2024+ Land Cruiser LC250. Product page for anyone interested: https://sxthelement.com/products/2024-toyota-tacoma-4runner-land-cruiser-front-mount-intercooler – Nathan @ SXTH Element

TRD JON

Administrator

Staff member

Jun 13, 2024

My 4th Gen Tacoma TRD Off Road was recently in GFCs booth at Overland Expo West in Flagstaff Arizona. My truck was showcasing their new Topper that they have for the 4th Gen. The overall experience was awesome, and it was so rad to have my vehicle showcased so people could not only see GFCs new Topper, but also see the new Tacoma up close. I was able to open up the interior for several viewers as well who wanted to see inside and sit in it too. It was such a rad experience.

My 4th Gen Was In A Booth At Expo West!!!

TRD JON

Administrator

Attachments

Recent

Dyno-Proven Gains from Our SXTH Intercooler

Who is going to tune their 4th Gen Tacoma? OTT Tune

Should I Sell My Fully Built 3rd Gen for a 4th Gen Tacoma?

Rough Country Liners for Tacoma: Solution or Airflow Problem?

Custom Tacoma Audio Build: Kenwood Components and MTX Sub Install

Exploring Sidio Crates for my Tacoma Truck: A Budget-Friendly Alternative to Milwaukee Packout

Quick Guide to Using Your Tacoma's Shift Lock Override

Tacoma Sxth Element Intake: 30-Min Install with Killer Turbo Whoosh

Tacoma RC 87 +00 Offset: How’s the Fitment on Your Truck?

Sharing a Budget-Friendly Tacoma Interior Mod: Vibrant Vinyl Logo Decal

How I Fixed My Tacoma's Trailer Issue with a Simple 7-Pin Plug Tweak

Mace MFG Volume Knob

Similar threads