Timbren Industries Bump Stops finally installed

4thgen.taco · 2026-03-13T14:08:04+00:00

Alright so I made the move to 37s! Finally has been done. I had been looking to do this for awhile now but had to figure out just how I wanted to do it without portals and with a 2.5 inch coil over lift. After watching some videos I knew it was going to require cutting plastic…. And the body. I have more pictures coming soon but here is a sneak peak of the rear so far and I’ll explain what I did. In the first pic you can see what it used to look like and see where I ultimately chose to cut. This cut was with the natural body line and fender flare. Once I cut that line I used the cut line to cut the body. This was the hard part. To make it easier I could’ve taken a marker and traced the line and then taken off the fender flare but I wanted a percise cut. After this was done it was all about taking the burrs out and cleaning it up. Take your time when you do this. I still need to do the front but I am waiting for wider fender flares from another company so I will have to redo the rear and will make another post! Thanks for reading. Good luck cutting!

@bronztaco

Member

Jul 22, 2024

Hey Toyo Fam!

Check out my new Mod by Timbren Industries. Ultimately, Timbren bump stops are a practical upgrade if you frequently carry heavy loads or tow trailers with your Toyota Tacoma. They help maintain your vehicle's performance and comfort under load without the complexity or ongoing maintenance of other suspension enhancements. If you’re looking for smoother ride without bottoming out all the time, I highly recommend this MOD

View attachment IMG_8590.jpeg

You must log in or register to reply here.