Road trip from Houston to Dallas

Top 8 Rock Sliders for the 2024+ 4th Gen Tacoma

BG · 2024-09-10T00:34:23+00:00

Looking for the best rock sliders for the 2024+ 4th Gen Tacoma? Key factors to consider are kick-outs for extra protection versus no kick-outs, DOM vs. HREW tubing for strength, top plates vs. no top plates, and angled versus non-angled sliders. If you could choose any brand/style/design out of the options below, which one would you take and why? In no specific order, here are some of the best rock sliders for the 24+ Tacoma. 1. C4 Fabrication The C4 Fabrication Rock Sliders are built with square and DOM tubing, these sliders are designed to take hits and hold up over time. The optional serrated step plates add grip for everyday use without getting in the way on the trail. Quick Specs: 2" x 2" square tubing main body 1-3/4" DOM round tubing support Optional stainless step plates Raw steel or powder-coated finish Find Them Online: https://c4fabrication.com/collections/tacoma-2024 2. Cali Raised LED The Cali Raised LED Step Edition sliders give you solid tubing with an integrated filler plate, making them practical for everyday use while still built for the trail. If you prefer a more tucked, angled design, the Trail Edition version is also available with about a 20° angle for better clearance. Quick Specs (Step Edition): 1.75″ DOM tubing, 0.120″ wall Optional kick-out or no kick-out Aluminum filler plate, 0.09″ thick Bolt-on install with Grade 8 hardware Finish options: raw, powder-coat, or bedliner Quick Specs (Trail Edition): 1.75″ DOM tubing, 0.120″ wall Optional kick-out or no kick-out Angled design at ~20° Bolt-on install with Grade 8 hardware Finish options: raw, powder-coat, or bedliner Find Them Online: https://caliraisedled.com/collections/2024-toyota-tacoma-bumper-sliders-skids 3. RCI Off-Road RCI Metal Works Rock Sliders use 2″ square tubing with welded gussets for added strength, with the option of a flatter step or a steeper angle for clearance. Built to handle full side support, they’re designed to protect rocker panels and doors while staying functional for everyday use. Quick Specs: 2″ square main tube with 1.75″ DOM outer rails ¼″ gussets on all four legs with 3/16″ frame plates Laser-cut 3/16″ steel end caps Bolt-on install, no drilling Hi-lift capable and built to protect rocker panels and doors Find Them Online: https://rcimetalworks.com/product/rock-sliders-4th-gen-tacoma/ 4. Westcott Designs Westcott Designs Rock Sliders are built from .120-inch wall tubing with laser-cut steel frame plates, hand-welded for strength and precision. They’re available in either a flat 0° setup or a 20° angle, with optional top plates that add grip and a bottle opener. Quick Specs: .120″ wall HREW or DOM tubing Laser-cut .188″ steel frame plates MIG or TIG welded construction 0° flat or 20° angled design Optional top plates with stainless accent and bottle opener Find Them Online: https://westcottdesigns.net/product/2024-toyota-tacoma-4wd-short-bed-rock-sliders/ 5. Southern Style Off-Road Southern Style Offroad sliders are built from laser-cut 3/16" wall square tubing and hefty 1/4" mounting plates, all powder-coated matte black with a 0° kick-out design and dimple-die top plates to help with traction even in muddy terrain. Quick Specs: 1/4" thick mounting plates Laser-cut 3/16" wall square tubing 0° kick-out configuration Dimple-die top plates for traction Grade 10.9 hardware included Find Them Online: https://southernstyle-offroad.com/collections/tacoma-2024-up 6. CBI Off-Road The CBI Offroad Fab Overland Bolt-On sliders are built tough with heavy-duty DOM tubing and offer either a flat top-plate step or a sleek angled profile. They bolt up in about an hour, fit both 5' and 6' double-cab beds (excluding 2WD models) Quick Specs: Heavy-duty DOM tubing construction Flat top-plate or angled options Configurable for Double Cab, 5′ or 6′ bed Finish choice: bare metal or black powder coat Supports vehicle weight for jacking or recovery Find Them Online: https://cbioffroadfab.com/product-category/toyota/tacoma/tacoma-rock-sliders-side-steps/ 7. NyTop NYTOP Rock Sliders use a flat-panel design instead of traditional tube work, giving a clean low-profile look with plenty of strength. The flat top surface doubles as a step, while the angled underside helps the truck slide over obstacles without catching. Quick Specs: 3/16″ and 1/4″ high-strength steel construction Flat 3″ step surface 25° angled underside TIG-welded design Supported up to 3 metric tons during testing Find Them Online: https://nytop.com/toyota-tacoma-accessories-store 8. Restless Off-Road Restless Off-Road Rock Sliders offer serious strength with 1.75″ .120 wall DOM tubing plus gussets and plates, offering adjustable protection that also serves as a functional step. These sliders come with built-in rock light brackets and versatile angled or top-plate options. Quick Specs: 1.75″ DOM round tube, .120″ wall ¼″ gussets and 3/16″ mounting plates Angle options: 1/8″ kick-out or full top plate add-on Built-in rock-light mounting brackets Uses Grade 8 hardware; bolt-on to existing frame Will not fit KDSS or X-reas models Find Them Online: https://www.restlessoffroad.com/

underground.trd

New member

Jun 12, 2024

Just hit the 5K mile mark and this truck has been a blast =) we most recently did a 600 mile road trip from Houston to Dallas (and back)

Still determined to build the best “Swiss-army knife” of a truck for our lifestyle (check out the MPG we averaged on the way up to Dallas)

Road trip from Houston to Dallas

underground.trd

New member

Attachments

Recent

Top 8 Rock Sliders for the 2024+ 4th Gen Tacoma

Diode Dynamics SS3 Ditch Lights

Bull Bar, Brush Guard, Bumper Recommendation (Deer Protection) - 2026 Trailhunter

Let's See Your Wheel & Tire Combo!

Paint Issues On New Tacoma - Chipping On Front Of Bed

285/70/17 vs. 295/70/17

Diode Dynamics SS6 - Factory Fog Light Upgrade

2024 Tacoma TRD OR - Storm Tropper

FREE 4GTaco Decals Available

2025 Blue Crush TRD Sport (aka Soundwave) - Build List So Far!

Adding Fog Lights To SR?

Any Options For Oil Catch Cans/Separators? Thoughts On Them In General?

Similar threads