Lift Kit + 285/70R17s + Alignment For This Underground 4th Gen

SXTHElement · 2025-04-15T13:47:16+00:00

We're working on a new intercooler upgrade for the 4th gen Tacoma, and it's shaping up to be a solid improvement over the factory unit. The core features more charge air rows for better thermal efficiency, and we're using cast aluminum end tanks for improved strength and flow characteristics. Lower intake air temperatures during high-stress conditions are the main goal here. As most know, once IATs rise past a certain point, the ECU begins pulling timing and boost to protect the engine, which means power drops off. This setup is designed to delay that threshold and keep performance consistent for longer periods. The prototype is already in development. We're currently testing with 3D printed aluminum-magnesium end tanks to validate fitment and flow. Once we have it on the truck, we'll be posting dyno and temperature data so everyone can see the actual performance difference. If you're pushing your Tacoma hard or live somewhere hot, this will be worth watching.

stellarbuilt

New member

Vendor/Sponsor

Feb 25, 2025

#1

The customer got his vehicle aligned at the shop today after a lift kit install. Paired with a set of methods and 285/70R17s… this a killer-looking setup.

If you're in the market for a new suspension, off-road alignment, along with fresh wheels and tires (mount and balance), reach out to us anytime. We're happy to answer any questions you might have.