Looking for Bed Stiffeners that are compatible with the Leitner Designs ACS bed rack!

redhead_jesss · 2025-04-24T20:40:17+00:00

One of the easiest mods I’ve done so far is adding the ScreenProTech matte screen protector to the display! I wanted to protect the screen from scratches, and from experience with my old rig, I’ve learned that dirt and displays/screens don’t mix — no matter how careful you are when cleaning. So definetly wanted to do things differently this time around! I also added a clear protector for the cluster display, but I’m a huge fan of the matte option for the main screen. It cuts down the glare big time and makes everything easier to read, no matter the time of day. Not the flashiest mod ever, but it’s one of those simple upgrades that just makes sense — 100% worth it.

redhead_jesss

Active Wheeler

Yesterday at 10:29 PM

Hey everyone!

I’m on the hunt for bed stiffener recommendations that are compatible with my Leitner Designs ACS bed rack on my 4th gen Tacoma. I haven’t tested any options yet, but I know this was an issue I ran into on my 3rd gen as well — until Leitner came out with their own bed stiffeners that worked with the rack. Unfortunately, they haven’t released a version for the 4th gens just yet.

The main issue is that the Leitner rack has a support bar that runs down to the frame and uses the same bed bolts that most stiffeners do. (I've attached a photo below) So stacking the two setups gets tricky and I haven’t found a clean solution yet.

If anyone’s found a set that works, or has come up with a solid workaround, I’d love to hear what’s worked for you!

Thanks in advance!