We replaced the lower fake vents on my neighbor's SR Tacoma with these DRL/Sequential turn signal lights. The hardest part honestly was getting the old vents out. We had to undo part of the front fender liner to reach up and depress the tabs on the old vent to release it to come out. The wiring for the DRL portion just went into the standard 10A INJ fuse, and for the blinkers (if you elect to run them) just wire tapped into the blinker harness, blue wire on the passenger side, and yellow wire on the driver's side. We tested it all out first by just inserting the wire into the pin of the harness to verify the proper connection.
It looks pretty cool honestly!
It looks pretty cool honestly!