Mud Guards 24-25 TRD PRO Tacoma

Dyno-Proven Gains from Our SXTH Intercooler

SXTHElement · 2025-08-01T14:04:26+00:00

Hey everyone, We just finished dyno testing our new front mount intercooler for the 2024+ Tacoma, and wanted to share some real numbers and context with you all. This test was done on a stock truck with only our intercooler installed — no intake, no tune. The goal was to isolate what the intercooler alone can do. We used 4th gear on the 10-speed auto, which meant we had to feather the throttle below 4K RPM to avoid kickdown, so the low-end numbers are a bit skewed. But above 4K, the results were extremely consistent and repeatable. Here’s what we saw comparing OE vs SXTH intercooler: Peak power jumped from 248.6 hp to 264.1 hp (+15.5 hp) Peak torque increased from 288.6 lb-ft to 303 lb-ft (+14.4 lb-ft) Midrange output was noticeably stronger across every run Even in worst-case comparisons, our core outperformed factory We’re seeing lower intake temps across the board thanks to: A bar and plate core with 45% more volume Lower pressure drop (1.5 psi vs 2.4 psi stock) Up to 50°F lower temps at the turbo outlet and 12°F lower post-intercooler It’s a direct bolt-on, retains all OEM sensors and components (including grille shutters), and doesn’t require a tune. It’s also compatible with the 2025+ 4Runner and 2024+ Land Cruiser LC250. Product page for anyone interested: https://sxthelement.com/products/2024-toyota-tacoma-4runner-land-cruiser-front-mount-intercooler – Nathan @ SXTH Element

Wilddawg95

New member

Jan 28, 2025

Can’t find the part number for the OEM Toyota mud guards for my incoming 25 TRD PRO Tacoma. I have the part number for the TRD Offroad. Are they the same or is the PRO different? Thanks

Pappy

Member

Feb 1, 2025

PK389-35R00-P1. These are the larger "Canada" mud flaps. Around $110 at a discount dealer.

Wilddawg95

New member

Feb 1, 2025

Thanks for the info! So these will fit the TRD Pro, correct??

Mud Guards 24-25 TRD PRO Tacoma

Wilddawg95

New member

Pappy

Member

Wilddawg95

New member

Recent

Dyno-Proven Gains from Our SXTH Intercooler

Who is going to tune their 4th Gen Tacoma? OTT Tune

Should I Sell My Fully Built 3rd Gen for a 4th Gen Tacoma?

Rough Country Liners for Tacoma: Solution or Airflow Problem?

Custom Tacoma Audio Build: Kenwood Components and MTX Sub Install

Exploring Sidio Crates for my Tacoma Truck: A Budget-Friendly Alternative to Milwaukee Packout

Quick Guide to Using Your Tacoma's Shift Lock Override

Tacoma Sxth Element Intake: 30-Min Install with Killer Turbo Whoosh

Tacoma RC 87 +00 Offset: How’s the Fitment on Your Truck?

Sharing a Budget-Friendly Tacoma Interior Mod: Vibrant Vinyl Logo Decal

How I Fixed My Tacoma's Trailer Issue with a Simple 7-Pin Plug Tweak

Mace MFG Volume Knob

Similar threads