3D Printed Plugs for Tacoma Air Dam Removal Noise Fix

Lasfit LED Backlights Might be the Best Backlights Option for your Truck Plus a Free Installation Tip

Rico's4G · 2025-09-08T06:59:57+00:00

Does anyone else use Lasfit LED backlights? I've had mine for over 6 months now. They work perfectly. Honestly, sometimes I even forgot about them. That's the way it should be. Just to share a tip for anyone who hasn't installed them yet on their truck. They only work when they are in the bulb sockets one way. So put the bulb in the socket and test them before placing the socket back into the light housing. If they don't work, just pull the bulb out and switch them around. I hope this makes sense.

Rico's4G

Member

Aug 16, 2025

Lots of people have had this howling noise come from their truck after removing their air dam.

There's this 3D printed plugs i
I stumbled upon and its quite very cheap too.

You can print as many as you need in just a few minutes. I think this is better than getting your plugs from Toyota.

Here’s the link: 3D Print

3D Printed Plugs for Tacoma Air Dam Removal Noise Fix

Rico's4G

Member

Recent

Lasfit LED Backlights Might be the Best Backlights Option for your Truck Plus a Free Installation Tip

How Much MPG Do You Lose with 33/12.50-18 Nitto Ridge?

First snorkel

Removal TRD Sport Tailgate Panel

The First High Clearance Cross Member Delete Rear Bumper From Mountain Yotas For 4G Tacoma

Rugged Revive Rinse Free Sponge Bath Wipes - Quick Camp Shower Option

Track (Panhard) Bar Correction Kit From DR. KDSS

Bent My Rear Lower Links While Wheeling

Two Main Complaints When Off-Roading My 4th Gen

MPGs With 37" Tires For Hybrid 4th Gen Tacoma

Tire Pressure System Fault/Malfunction After Getting Flat & Swapping In Spare

Avoiding Transmission Overheating While Off-Roading

Similar threads