I installed some Lock Off-Road Machine Polished wheels onto my 4th Gen TRD Pro Tacoma. What do you all think? These are a 17x9 with a 0mm offset. The poke with the 33x12.5 Arroyo MTs actually isn't that bad at all thanks to the TRD Pro having larger 3" or so fender flares. Lock is coming out with more positive offsets in the future for these new Toyotas for those who like less of an aggressive poke.
Note: If you want to run these wheels, you'll need a hub adoptor since the bore is 95.1 for last get Toyota trucks. I picked up this hub bore adaptor kit on amazon https://amzn.to/4bdlt1w. Also, if you are looking at these Baja wheels, they have a super slim center cap and you may need to pop off your dust caps on the front axels of your off-road version trucks due to the extended axels they have.
Note: If you want to run these wheels, you'll need a hub adoptor since the bore is 95.1 for last get Toyota trucks. I picked up this hub bore adaptor kit on amazon https://amzn.to/4bdlt1w. Also, if you are looking at these Baja wheels, they have a super slim center cap and you may need to pop off your dust caps on the front axels of your off-road version trucks due to the extended axels they have.
