Taco Garage DMM installed!

SXTHElement · 2025-08-01T14:04:26+00:00

Hey everyone, We just finished dyno testing our new front mount intercooler for the 2024+ Tacoma, and wanted to share some real numbers and context with you all. This test was done on a stock truck with only our intercooler installed — no intake, no tune. The goal was to isolate what the intercooler alone can do. We used 4th gear on the 10-speed auto, which meant we had to feather the throttle below 4K RPM to avoid kickdown, so the low-end numbers are a bit skewed. But above 4K, the results were extremely consistent and repeatable. Here’s what we saw comparing OE vs SXTH intercooler: Peak power jumped from 248.6 hp to 264.1 hp (+15.5 hp) Peak torque increased from 288.6 lb-ft to 303 lb-ft (+14.4 lb-ft) Midrange output was noticeably stronger across every run Even in worst-case comparisons, our core outperformed factory We’re seeing lower intake temps across the board thanks to: A bar and plate core with 45% more volume Lower pressure drop (1.5 psi vs 2.4 psi stock) Up to 50°F lower temps at the turbo outlet and 12°F lower post-intercooler It’s a direct bolt-on, retains all OEM sensors and components (including grille shutters), and doesn’t require a tune. It’s also compatible with the 2025+ 4Runner and 2024+ Land Cruiser LC250. Product page for anyone interested: https://sxthelement.com/products/2024-toyota-tacoma-4runner-land-cruiser-front-mount-intercooler – Nathan @ SXTH Element

redhead_jesss

Active Wheeler

Apr 23, 2025

#1

Finally got the chance to make it down to @the_taco_garage (IG handle) shop and add their Dashtop Multi-Mount to the Tacoma!

I really like that it doesn't require any drilling (as my 3rd gen mount did--different brand though) and I love how OEM it looks. It also is super easy to install and the low profile billet arms (the plates that come around to the sides of the screen) help to attach my phone mount in a less obstructive position by mounting on the side of the screen rather than above it.

Super happy overall! I will leave a link below for anyone that wants to check it out!

Billet Aluminum 4th Gen Tacoma / 6th Gen 4runner Dashtop Multi Mount (DMM)

The best accessory mounting solution for fourth generation Toyota Tacoma and 6th generation 4runner. An advanced solution to bolt anything right into your dash with just one screw. The Dashtop Multi-Mount (DMM) turns the top of your dashboard into a mounting platform for a variety of...

thetacogarage.com