2024 Tacoma Rago Fabrication Rear Bumper

SXTHElement · 2025-08-01T14:04:26+00:00

Hey everyone, We just finished dyno testing our new front mount intercooler for the 2024+ Tacoma, and wanted to share some real numbers and context with you all. This test was done on a stock truck with only our intercooler installed — no intake, no tune. The goal was to isolate what the intercooler alone can do. We used 4th gear on the 10-speed auto, which meant we had to feather the throttle below 4K RPM to avoid kickdown, so the low-end numbers are a bit skewed. But above 4K, the results were extremely consistent and repeatable. Here’s what we saw comparing OE vs SXTH intercooler: Peak power jumped from 248.6 hp to 264.1 hp (+15.5 hp) Peak torque increased from 288.6 lb-ft to 303 lb-ft (+14.4 lb-ft) Midrange output was noticeably stronger across every run Even in worst-case comparisons, our core outperformed factory We’re seeing lower intake temps across the board thanks to: A bar and plate core with 45% more volume Lower pressure drop (1.5 psi vs 2.4 psi stock) Up to 50°F lower temps at the turbo outlet and 12°F lower post-intercooler It’s a direct bolt-on, retains all OEM sensors and components (including grille shutters), and doesn’t require a tune. It’s also compatible with the 2025+ 4Runner and 2024+ Land Cruiser LC250. Product page for anyone interested: https://sxthelement.com/products/2024-toyota-tacoma-4runner-land-cruiser-front-mount-intercooler – Nathan @ SXTH Element

TRD JON

Administrator

Staff member

Jul 29, 2024

#1

Rago Fabrication has posted on Instagram their take on a rear bumper for the new 2024 Toyota Tacomas. To me it looks very OEM+. It keeps all the sensors while allowing for some aux lighting and more.

They captioned their post with:

With our all-new Rear bumper for 4th Gen Tacoma bumper, you won’t lose any of your OEM capabilities. The factory parking sensors, blind spot sensors, license plate lights, recovery points, and trailer wiring harness are all retained with no cutting necessary. As always, all Rago products are proudly designed and made in the USA.