No audio from 14" JBL System - no volume response either

Voodoo452

Active Wheeler
Joined
Aug 30, 2024
Messages
200
Reaction score
107
So, just after reaching 3k on my TRD Pro, the audio cut-out/stopped working, while driving, no sounds whatsoever from the head unit from any source... The volume knob could put into stand-by but not control audio volume, no indication on screen of any change in volume when adjusting.

Was streaming audio via Bluetooth at the time, just after a phone call. I do recall the radio reviving an update, OTA?? earlier in evening before starting to 300m drive. Now the odd part was the head-unit worked, functioned, it just would not show any volume changes or anything, simple power off/power on was not enough, had to hold the volume knob (press/hold for 10-30s) to reset the head unit and/or the JBL amp?.

Not sure if anyone else has experienced this, but operation resumed to normal after pressing/holding the vol knob, to kill power and reset it.
 
First time hearing about this. Could it be a loose connection? Like a wire inside the 14inch screen.
 
First time hearing about this. Could it be a loose connection? Like a wire inside the 14inch screen.
No idea, has worked fine, prior to the "Update" i saw flash on the screen the other morning, same day it happened.
 
First time I'm hearing about this, but good to know on how to reset it.
 

Recent

This thread consolidates information from...
This thread expands on pages 143 and 641 of...
Tacoma Safety System Volumes: Adjust Buzzer...
This thread unifies smart key system...
Want to customize how your Tacoma's automatic...
Here's everything you need to know about light...
Proper tire pressure affects your Tacoma's...

Similar threads

Back
Top