A Simple Fix for Air Pressure Waring for Your Tacoma

I Cut Off My Hitch/Crossmember! New Rear Bumper Coming Soon From Backwoods

rustytaco · 2026-03-17T06:24:23+00:00

So... I wasn't originally going to take it this far, but things happen, lol. I had the chance to go down to work with the Backwoods guys on a new project they're about to wrap up for the 4th Gens - rear bumpers. This is technically a bolt-on option, however, you have the option of cutting your hitch/crossmember off to gain a few more inches of clearance. Around 4" if I remember correctly. That's quite a lot of clearance. If you've taken your truck off-road, you might already know the departure angle isn't the best and the low hanging hitch literally drags on everything. When I first heard about the frame modification, without a high clearance bed portion (meaning cutting the end of the bed for a true "high-clearance rear), I wasn't quite sure if it was the move. But once I saw the final prototype on the Backwoods truck, and how much I would gain, I decided to make the jump. And I'm real glad I did. The final result is super clean and the rear end is starting to see some big improvements. And if you're wondering, yes, you still get a hitch receiver. It's under the license plate (I need to get a spring loaded bracket). So you're still able to tow. The bumper with all the reinforcements and frame contact points is definitely as strong, if not stronger than the OEM member. A swing out option is tentatively planned for the future, but ETA is still TBD. https://backwoodsadventuremods.com/ No direct link quite yet, but you can sign up for their email list to get notified when they're ready to purchase. The rough estimate is summer/fall. A quick shot from my trip back home through Missouri...

Rico's4G

Member

Aug 17, 2025

Don't know if anyone would find this helpful but there was a time I was getting an air pressure warning when all my tires were evenly at 32 PSI .

What I did was, I went to the dash settings, then to vehicle settings, then to tpms settings and had to tell it to use your current psi.

It's not really a big issue but a slight one with a simple fix too. Haven't really had any similar issue ever since.

A Simple Fix for Air Pressure Waring for Your Tacoma

Rico's4G

Member

Recent

I Cut Off My Hitch/Crossmember! New Rear Bumper Coming Soon From Backwoods

New 74Weld Products Just Landed - The Portal Truck Build Begins...

SXTH Element CPLT Installed

All Terrain (AT) Vs. Rugged Terrain (RT) - What Tires Work Best For You

Goose Gear Fully Loaded With My New 74Weld Parts

New Member From Central Louisiana

How Much Cutting Is Required To Make 37s Fit?!

Rear Spring Upgrade for a Light Camper Setup

King 2.5 Suspension – Worth the Price on the 4th Gen Tacoma?

King Shocks 2.5 Suspension + Mazulla Upper Control Arms

Welded Nuts For Skid Plate Broke Off Inside Frame

CBI Offroad Rock Sliders (no kick out) - Install Overview & First Impressions On Performance

Similar threads