Manual adjusting seats

3 Front Bumper Options To Choose from - C4 Fabrication

C4Fabrication · 2025-03-13T03:17:30+00:00

We Currently Have 3 Front Options To Choose from For the 4th Gen Tacoma - With Variations For Each Hey guys, C4 Fabrication here! We've been working hard to bring you a variety of front bumper options for the 4th Gen Tacoma to match your off-road and overland needs. Here are the latest options available: Overland Front Bumper This is a classic plate bumper inspired by our 2nd and 3rd Gen Tacoma bumper but completely redesigned to fit the body lines of the 4th Gen Tacoma. We've also redesigned areas for TSS compatibility in addition to how the plate actually comes together. All in all, this is a very robust steel winch bumper designed for maximum protection and trail functionality with three options for hoops. Ideal for those tackling technical trails or running heavy gear up front. Product Page: https://c4fabrication.com/collections/tacoma-2024/products/tacoma-overland-front-bumper-4th-gen-2024 Specs: 3/16" laser-cut P&O steel construction D-ring tabs are 3/4" thick, fully welded front and back Includes washer tank skid and winch controller relocation kit Fits most 8k-12k winches (Warn VR series confirmed fit) Designed for 30" single row light bars (Baja Designs S8, Heretic Studio 30", and Rigid SR-30 recommended). Other light bars will fit, but they may get cut off at the top and bottom. Fog light pockets fit Baja Designs Squadron. Other pods fit, but they may get cut off or create a small gap if they are too small. Weight: 114 lbs (no bull bar), 121 lbs (low bull bar), 128 lbs (mid bull bar w/ gussets), 138 lbs (full bull bar w/ headlight hoops) Bull bar options are Toyota Safety Sense (TSS) and parking sensor compatible Ships bare steel (requires painting or powder coating) Hybrid Front Bumper This is a C4 Fabrication favorite. This is one of the most popular designs we came out with almost 10 years ago. Combines the strength of a full-width front bumper with a sleek, low-profile design all while having an almost unlimited amount of lighting options. The hybrid features light mount tabs on the wings so that you can mount up to three pod-style lights on both the driver and passenger sides; however, with some creativity, we've seen people add more. The hybrid is lighter and more customizable than the Overland plate option we offer. There are two options for hoops, both low height and mid-height with gussets, which offer an impressive look and functionality. Product Page: https://c4fabrication.com/collections/tacoma-2024/products/tacoma-hybrid-front-bumper-4th-gen-2024 Specs: Bumper main body is 3/16" thick steel Tubing is all 1 3/4" OD, 1/8" wall thickness (mid-height bull bar gussets are 1 1/2" OD) D-ring tabs are 3/4" thick, fully welded front and back Includes washer tank skid and winch controller relocation kit Fits most 8k-12k winches (Warn VR series confirmed fit) Designed for 30" single row light bars (Baja Designs S8, Heretic Studio 30", and Rigid SR-30 recommended) Up to 4 Baja Designs Squadron lights and two Baja Designs S2 lights can be mounted in the bumper alongside the 30" light bar Requires cutting of the plastic bumper to install Weight: 107 lbs (no bull bar), 115 lbs (low bull bar), 123 lbs (mid bull bar w/ gussets) Bull bar options are Toyota Safety Sense (TSS) and parking sensor compatible Ships bare steel (requires painting or powder coating) Lo-Pro Front Bumper This is our OEM++ bumper. It's a sleek, low-profile option that retains full OEM sensor and safety system functionality while providing excellent winch capability and protection on the trail. With the Lo-Pro, you can retain most of your factory plastics or option the high clearance additions which will not only provide a better approach angle for certain obstacles but a very aggressive look for a low-profile bumper. Weight is always a concern so if that's top of mind, this bumper is for you. Weighing in at only 74 lbs, this is a great lightweight, trail-ready, recovery-ready bumper for your 4th Gen. Product Page: https://c4fabrication.com/collections/tacoma-2024/products/tacoma-front-lo-pro-winch-bumper-4th-gen-2024 Specs: Outer shell made from 11 ga steel Winch plate and mounting brackets made from 3/16" steel 3/4" D-Ring tabs fully welded front and back Fits most 8-12k winches without integrated control packs (control pack relocation and some trimming may be required) Winches with synthetic rope and a hawse style fairlead provide best fitment and functionality (some roller fairleads may be too large) Designed to mount a pair of Baja Designs S2 fog lights (other brands may not fit perfectly) Designed to work with all trims (Trailhunter models require front skid trimming for fitment) Retains full functionality of OEM sensors and safety systems Requires cutting of the center plastic portion of the factory bumper cover for installation Includes all hardware for installation Weight: 74 lbs Ships bare steel (requires painting or powder coating) Bumper Variations LO-PRO with High Clearance Additions Overland Plate with Mid-Height Bull Bar + Tube Gussets Overland Plate with Full Height Bull Bar + Tube Gussets Overland Plate with Mid Height Bull Bar Overland Plate with No Bull Bar Hybrid with Low Height Bull Bar

FL_Jake

Member

Jun 27, 2024

Anyone have advice on how to “remember” the seat position with manual adjusting seats? It’s a real annoyance having to find that sweet spot after taking it to the dealership, or letting someone else drive it.

Manual adjusting seats

FL_Jake

Member

Recent

3 Front Bumper Options To Choose from - C4 Fabrication

New SXTH Element Side-Step Relocation Bracket Coming Soon!

Snow & Ice Buildup Cause Sensors To Malfunction With Errors

C4 Fabrication Introduction - We're Stoked on the 4th Gen!

Show Me Your Underground Tacoma!

Top 8 Rock Sliders for the 2024+ 4th Gen Tacoma

Cali Raised LED Bed Rack Modular Platform

Cali Raised LED Modular Front Bumper for 4th Gen Tacoma $500!

FS: CBI Aluminum Full Skid Plate for 24+ Tacoma (Non-Hybrid ONLY)

2024-25 Toyota Tacoma ARB Sports Bar - NO SHIPPING

Lasfit Liners Installed On My 4th Gen Tacoma

Camping With My Sunnyside Off Road Boony Stomper Trailer

Similar threads