Plastic Bed Rail Caps loose and twisting

derrenp

New member
Joined
Oct 14, 2024
Messages
11
Reaction score
10
Location
BC
Tacoma
24 trd off road
Brand new Taco, bed rail plastic caps appear to be secured by little pieces of Styrofoam glued to the caps and to the metal box all letting go causing the plastic caps to be loose and lifting up. Dealer tried re gluing back down but glue ate the styrofoam so waiting for at least one new bed cap from dealer as other one still holding. New ones on lot all doing the same. Even if you put a little pressure on the inside edge of the plastic bed cap it lifts leaving a space as seen in the pics I attached.
 

Attachments

  • bed rail1.jpg
    bed rail1.jpg
    38.2 KB · Views: 175
  • bed rail2.jpg
    bed rail2.jpg
    51.1 KB · Views: 6
Same issue here. Looking at service info it states that the rails are not to be reused after removal.
 
Same issue here. Looking at service info it states that the rails are not to be reused after removal.
where do you find the service info stating that? I had to snap part of that rail back down after getting it back from the dealer who tried to re glue the front part of the rail back down. thx
 
Here is what the bottom looks like, shitty design in my opinionbed rail bottom.jpg
 
Mine were like that from day 1. Kind of annoying for a new truck. If I stand on them they flex like crazy too. Would be interested in a metal replacement not just another plastic factory one.
I would like a metal replacement too!
 

Recent

Went on my First trip after Installing the...
Installed these engine and trans skids from...
Alright everyone I just did the first oil...
Pictures of everything will be included below...
Right after getting back from the dealer and...
We Currently Have 3 Front Options To Choose...
Hey everyone, Wanted to share something we’ve...
Hey guys, C4 Fabrication here. We've spent the...
Hey guys! I picked up Underground Tacoma...
Looking for the best rock sliders for the...
While at the SAVE show in Florida, I saw a new...
Back
Top