2024+ Tacoma - Coolant Type & Capacity

[4gtacoadmin]

This guide provides the definitive coolant specifications from your 2024+ Tacoma's official owner's manual. Use these OEM specifications to maintain warranty compliance and peak cooling system performance.

Tacoma Coolant: Type, Capacity & Super Long Life Specs​

Required Coolant Type​

Your 2024+ Tacoma's cooling system was engineered specifically for Toyota Super Long Life Coolant. Using the correct coolant type is essential to:

• Prevent corrosion and rust formation
• Maintain freeze/boil-over protection appropriate for your climate
• Preserve gasket and water pump seal integrity
• Maintain full warranty coverage

- Source: Owner's Manual pages 527, 616

Toyota Specification:
Use only "Toyota Super Long Life Coolant" for your Tacoma cooling system.

Alternative Coolant Standard (if OEM brand unavailable):
Use only high-quality coolants meeting Toyota's hybrid organic acid technology (OHAT) standard:

• Ethylene glycol-based
• Non-silicate formula
• Non-amine composition
• Non-nitrite additive
• Non-borate content
• Long-life hybrid organic acid technology

- Source: Owner's Manual page 616

Critical Safety Requirement:
Do not use plain water alone in your cooling system under any circumstances.
- Source: Owner's Manual page 616

Cooling System Capacity​

Your 2024+ Tacoma's coolant capacity depends on engine configuration. Check your vehicle's documentation to determine which applies to your specific model.

Standard Gasoline Engine Models:

• 12.6 quarts (11.9 liters / 10.5 imperial quarts)

- Source: Owner's Manual page 616

Gasoline Engine with Turbo Intercooler:

• 12.8 quarts (12.1 liters / 10.6 imperial quarts)

- Source: Owner's Manual page 616

Checking Your Coolant Level​

Procedure:
The coolant level is correct when it reads between the "F" (Full) and "L" (Low) lines on the reservoir with your engine cold (not running and cooled for at least 5 minutes after shutdown).
- Source: Owner's Manual page 527

Important Precautions:

• Always check coolant level when the engine is completely cold
• Never attempt to open the radiator cap when the engine is hot
• If level is at or below the "L" line, add coolant carefully up to the "F" line

Why Coolant Type Matters for Your Tacoma​

Toyota Super Long Life Coolant uses long-life hybrid organic acid technology (OHAT) - it was engineered for the aluminum and bi-metal components in modern engines like yours. Standard coolants lack the corrosion inhibitors needed for your specific cooling system design.

Using the wrong coolant can result in:

• Accelerated corrosion and rust formation
• Water pump damage and premature failure
• Gasket and seal degradation
• Warranty coverage loss
• Cooling system failure under extreme conditions

Source Attribution​

Official Documentation:
All specifications in this guide are sourced directly from the official 2024+ Toyota Tacoma Owner's Manual (Document OM04041U):

• Coolant type specification: Pages 527, 616
• System capacity: Page 616
• Level checking procedure: Page 527

Disclaimer:
This guide is derived from the official 2024+ Toyota Tacoma Owner's Manual (OM04041U). Always follow your official owner's manual for warranty compliance and maintenance procedures. This is a reference guide only. Consult your Toyota dealership for service questions or if you are unsure of your vehicle's specific specifications.